Bedini Motor SSG SELF OSCILLATING Cooling Fan & Lighting, Startup 3volt, 2024!

A big hello to all mankind! Visit my YouTube channel &

SUBSCRIBE► https://www.youtube.com/user/GIORGOSXANIOS?sub_confirmation=1

and find various interesting things on Electrical ~ Mechanical and Electronic ~ Technology ...

Buying one helps my research tremendously,

helping me get all the supplies I need for the future.

This is a Bedini Fan Motor and this has Three Functions!

One is the original purpose to Charging 3.7v / 6v / 9v / 12v Batteries,

the second is to be used as Efficiency Light and

the third one is to be used as a Fan with 15 blue Leds.

The Bedini SSG Motor / Generator is the First REAL FREE ENERGY MACHINE

Released To The Public. It's Been Replicated By Thousands Of Independent Experimenters

All Over The World. The Bedini project is a set of plans that allows you to build a model

of a patented machine that runs from one battery, turns a wheel, charges a second battery.

John Bedini has presented a bequest to the world which can

bring back and enrich the used, abandoned batteries.

How Bedini SSG works...

Since magnets moves in the coils, a tiny electric current is stimulated into the main coils.

This activates the transistor to switch on, enabling electricity from the operated battery

to stream by way of the supplementary coils. The magnetic field generated in the secondary coils

provides the cycle a tiny lift up on its path past the coils. As the magnetic field sets off the coils,

the transistor is turned back off. This leads to the magnetic field in the supplementary

coils to drop (back emf). During this period,

the vibrant electric power makes its way into the process

which is emptied via a diode into the batteries to be charged.

This method demonstrated to generate additional energy on the

recharging aspect compared to the need to steer the motor.

In the method presented, the input current amounts between 10-500 mA.

This is a New Second "Revision" at "2024"of my Bedini pcb Module.

The winding on the fan remains the same.

"Handmade" Bedini Fan Motor with voltage operation from 3 volts to 14 volts maximum.

This device can charge small recharge batteries in capacity - maximum 7ah / 12V "

also recharge and use bad defective discarded batteries.

On many occasions the battery will in fact acquire further voltage,

workable power compared to the time it had been purchased.

After a while and many rounds of charging the batteries have become superior to brand new.

With small details added to electronic components that make its operation

even better and efficient compared to the previous version.

Now with a small toggle switch

you will be able to drive the original "MAIN" Bedini motor in three functions.

But also in "Self"-oscillation operation in all three functions as well.

Light - FAN -CHARGER

Ηow to operate it

The Bedini has two pairs of two cables with Alligator Clips.

First pair is the "Red - positive / Black - negative for the Primary Battery" to run the device.

Second pair is the "Yellow - positive / Green - negative for the Charging Battery" the second battery...

"Attention"

Never put these cables in the wrong position! Because this will Damage the circuit.

There are "two switches" one is with three places, "left" for the lamp

in the "middle" to charge the battery "cables with Alligator Clips

"Yellow - positive / Green - negative" and the "right" for the full color led.

The small switch is for the option to operate in the "Main"

original version of Bedini or in "Self"-oscillation operation.

Τhe Potentiometer is for "increase or decrease" the charge of the battery

or the light bulb or the 15 green leds.

Depending on the "operation" it performs, it has different uses.

"Main"-operation

When you use it to charge batteries, turning to the Right is to "increase"

and turning to the Left is to "decrease". But you have to find the right position

for the best results. Usually in the middle to the right you will look to find the appropriate point.

When you use it to light a bulb or 15 blue leds, turning to the Right is to "increase"

and turning to the Left is to "decrease" on lighting.

In this operation we have movement in the fan and synchronously with the speed

of the fan we have pulses feeding the blue LEDs or the lamp.

"Self" Oscillation - operation

My circuit can make "Self-Oscillation" without moving the motor and this function

is the "best" for charging batteries or for the lighting.

When you use it to charge batteries, turning to the Right is to "decrease"

and turning to the Left is to "increase". When you use it, you will see

the small indicator light to light up. This one is behind the Neon light, when it lights up

it is an indication of inefficient operation and you should turn the potentiometer

to the right until it goes off.

Usually in the middle to the left you will look to find the appropriate point.

When you use it to light a bulb or 15 blue leds, turning to the Right is to "increase"

and turning to the Left is to "decrease".

Also in these functions when the indicator light is seen to light up it is an indication

of inefficient operation and you should turn the potentiometer to the right until it goes off.

In this operation, we do NOT have movement in the fan, but if there is, we can stop it by hand.

Here we can apply very small supply voltages and turn on the lamp and the LEDs.

Like Joule Thief!

• Availability: 1 In Stock
• Model: 2024